Happy christmas WS (24)

Dec 8, 2013 9:31 PM CST Happy christmas WS
Green_Sleeves
Green_SleevesGreen_SleevesCarlow, Ireland174 Threads 37 Polls 4,812 Posts
I hope santy brings you a TONKA truck, like you've always wanted!




santa waving
Dec 8, 2013 9:50 PM CST Happy christmas WS
Pom_Pom
Pom_PomPom_PomBuenos Aires, Argentina71 Threads 32 Polls 1,740 Posts
Nothing for me? dunno

crying
Dec 8, 2013 9:53 PM CST Happy christmas WS
Green_Sleeves
Green_SleevesGreen_SleevesCarlow, Ireland174 Threads 37 Polls 4,812 Posts
Pom_Pom: Nothing for me?


Dec 9, 2013 7:46 AM CST Happy christmas WS
WESTERNSTAR1
WESTERNSTAR1WESTERNSTAR1†_ °_†, Cork Ireland8 Threads 5 Polls 3,490 Posts
that hammerite commercial rolling on the floor laughing thumbs up GS handshake
Dec 9, 2013 10:49 AM CST Happy christmas WS
i painted kit's alloy wheels back she is a real hum dinger now
Dec 9, 2013 10:49 AM CST Happy christmas WS
i painted kit's alloy wheels back she is a real hum dinger now
Dec 9, 2013 10:49 AM CST Happy christmas WS
i painted kit's alloy wheels back she is a real hum dinger now
Dec 9, 2013 10:57 AM CST Happy christmas WS
pedro27: i painted kit's alloy wheels BLACK she is a real hum dinger now
doh
Dec 9, 2013 11:00 AM CST Happy christmas WS
Green_Sleeves
Green_SleevesGreen_SleevesCarlow, Ireland174 Threads 37 Polls 4,812 Posts
pedro27: i painted kit's alloy wheels back she is a real hum dinger now


Now, when you say 'painted', I take it you mean 'sprayed'? You sprayed the wheels black?
Dec 9, 2013 11:11 AM CST Happy christmas WS
Green_Sleeves: Now, when you say 'painted', I take it you mean 'sprayed'? You sprayed the wheels black?


i decided not to spray them because ive never used a spray can before and found that i would probaly make a mess of it, so i painted them with 'matt black paint'' for alloys and steel. turned out well, next project slightly tinted windows
Dec 9, 2013 11:50 AM CST Happy christmas WS
Green_Sleeves
Green_SleevesGreen_SleevesCarlow, Ireland174 Threads 37 Polls 4,812 Posts
pedro27: i decided not to spray them because ive never used a spray can before and found that i would probaly make a mess of it, so i painted them with 'matt black paint'' for alloys and steel. turned out well, next project slightly tinted windows


thumbs up Hope it turned out ok. Did you have to do any prep work? Clean the wheels with a solution or wire wool them etc??


Tinting isn't easy, in fact, its bloody frustrating! But, it can be done if you have patience! I have my two back windows tinted, they were grand, theyre static fairly flat windows, took a bit of time to get them right, but, they turned out grand. Two front side windows, different story, had them done but they weren't 100%, as these windows obviously go up and down so theres a bit more work involved, so, I peeled them off. Boot window.....haven't even tried!

You need to use a garage or something also, the slightest bit of dust or hair etc blowing in the wind that gets stuck to the film will show up, in fact, the slightest breeze will have the film blowing all over the shop and if it sticks together or creases then that's usually the end of it!

Basically, if you want it done right, bring it to someone who knows how to do it! Theres nothing worse than a bad DIY tint job that has air bubbles or peeling! barf


My babóg with 35% tint on the back windows (gotta keep on the right side of the law too!)

Dec 9, 2013 12:04 PM CST Happy christmas WS
Green_Sleeves: Hope it turned out ok. Did you have to do any prep work? Clean the wheels with a solution or wire wool them etc??Tinting isn't easy, in fact, its bloody frustrating! But, it can be done if you have patience! I have my two back windows tinted, they were grand, theyre static fairly flat windows, took a bit of time to get them right, but, they turned out grand. Two front side windows, different story, had them done but they weren't 100%, as these windows obviously go up and down so theres a bit more work involved, so, I peeled them off. Boot window.....haven't even tried!

You need to use a garage or something also, the slightest bit of dust or hair etc blowing in the wind that gets stuck to the film will show up, in fact, the slightest breeze will have the film blowing all over the shop and if it sticks together or creases then that's usually the end of it!

Basically, if you want it done right, bring it to someone who knows how to do it! Theres nothing worse than a bad DIY tint job that has air bubbles or peeling! My babóg with 35% tint on the back windows (gotta keep on the right side of the law too!)



i sanded them down with sand paper and cleaned them spotless with cleaner, over all it turned out well.

i wouldn't chance doing tinted windows DIY, im getting it done professinally ive been looking on google for local lads that do it

so the car will have black wheels, black body, and black tinted windows.
Dec 9, 2013 12:07 PM CST Happy christmas WS
GS@ i bought a new picture phone, internet modern phone, i will take a pic of my car tommorow, and post them here
Dec 9, 2013 1:57 PM CST Happy christmas WS
Green_Sleeves
Green_SleevesGreen_SleevesCarlow, Ireland174 Threads 37 Polls 4,812 Posts
pedro27: GS@ i bought a new picture phone, internet modern phone, i will take a pic of my car tommorow, and post them here


thumbs up Get her a vinyl matt black body wrap at some stage, proper stealthy! cool
Dec 9, 2013 2:02 PM CST Happy christmas WS
IWILLTEASEYOU
IWILLTEASEYOUIWILLTEASEYOUTIPPERARY, Tipperary Ireland59 Threads 1 Polls 933 Posts
Green_Sleeves: Get her a vinyl matt black body wrap at some stage, proper stealthy!


thats my baby smitten

Dec 9, 2013 2:30 PM CST Happy christmas WS
Green_Sleeves
Green_SleevesGreen_SleevesCarlow, Ireland174 Threads 37 Polls 4,812 Posts
Dec 10, 2013 1:07 AM CST Happy christmas WS
Green_Sleeves: Get her a vinyl matt black body wrap at some stage, proper stealthy!


never heard of a vinyl matt black body wrap, what is that?
Dec 10, 2013 5:27 AM CST Happy christmas WS
IWILLTEASEYOU
IWILLTEASEYOUIWILLTEASEYOUTIPPERARY, Tipperary Ireland59 Threads 1 Polls 933 Posts
Green_Sleeves: Is that your car??


YEP purple heart
Post Comment - Post a comment on this Forum Thread

Stats for this Thread

1,329 Views
23 Comments
by Green_Sleeves (174 Threads)
Created: Dec 2013
Last Viewed: just now
Last Commented: Dec 2013

Share this Thread

We use cookies to ensure that you have the best experience possible on our website. Read Our Privacy Policy Here