Here is a list of Technology Blogs ordered by Most Liked, posted by members. A Blog is a journal you may enter about your life, thoughts, interesting experiences, or lessons you've learned. Post an opinion, impart words of wisdom, or talk about something interesting in your day. Update your blog on a regular basis, or just whenever you have something to say. Creating a blog is a good way to share something of yourself with others. Reading blogs is a good way to learn more about others. Click here to post a blog.
Paddy husker is used to remove the chaff
Paddy husker is a machine that is used to automate the processing of removing the chaff (outer husks) of rice grains accurately and with minimal breakage. Throughout history, there have been numerous techniques to hull rice. Traditionally, it would be pounded using some form of mortar and pestle. An early simple machine to do this is a rice pounder. Later even more efficient machinery was developed to hull and polish rice. These machines are most widely developed and used throughout Asia. The paddy husker(rice huller) realizes the hulling purpose through press and twist force between a pair of rubber rolls and by weight pressure. Rubber rollers may be used to reduce the amount of breakage of the grains, so increasing the yield of the best quality head rice. The hulled material mixture is separated into brown rice and rice husk by air force in the separating chamber.
The paddy rice is parboiled before the milling process. When the paddy is fed into the hopper of the dehuller, the blade is adjusted to the diameter of the paddy. The impaction led to the removal of husks and the blower separates the shaft from the rice. The rice and other impurities enter into the sieving bed of the vibrating sieve where the pebbles are separated from the rice.
Poor mastery of parboiling and milling techniques as part of major factor exacerbating rice quality problems, resulting in low market price, which in turn led to very low returns to rice processing activities. It was clear from his study that the major challenge to improve rice quality was the development of low cost but technically efficient and cost effective parboiling and milling technologies. Careful drying after harvest, threshing and parboiling is essential to prevent mould formation, discoloration and fermentation of the rice paddy. The milling stage is the point where actual dehulling (or dehusking) occurs. Dehusking is the removal of husk or hull. The rice milling operation is the separation of the husk (dehusking) and the bran (polishing) to produce the edible portion (endosperm) for consumption. There are mainly three methods of rice dehulling (or dehusking) in Nigeria. These are traditional or hand-pounding method, the small-mill processing method and the large-mill processing method.
Paddy separator is mostly used to separate product on the basis of the differences in their sizes and multi screen separators are used for classifying grains to size grades. Some screen separators incorporate fan to remove light particles.
For any new product, we will communicate with customers and take their ideas into consideration to make the best product and we cordially welcomes all of you to visit china-zjlg to visit us for th win-win future. Click to get more informations.
The paddy rice is parboiled before the milling process. When the paddy is fed into the hopper of the dehuller, the blade is adjusted to the diameter of the paddy. The impaction led to the removal of husks and the blower separates the shaft from the rice. The rice and other impurities enter into the sieving bed of the vibrating sieve where the pebbles are separated from the rice.
Poor mastery of parboiling and milling techniques as part of major factor exacerbating rice quality problems, resulting in low market price, which in turn led to very low returns to rice processing activities. It was clear from his study that the major challenge to improve rice quality was the development of low cost but technically efficient and cost effective parboiling and milling technologies. Careful drying after harvest, threshing and parboiling is essential to prevent mould formation, discoloration and fermentation of the rice paddy. The milling stage is the point where actual dehulling (or dehusking) occurs. Dehusking is the removal of husk or hull. The rice milling operation is the separation of the husk (dehusking) and the bran (polishing) to produce the edible portion (endosperm) for consumption. There are mainly three methods of rice dehulling (or dehusking) in Nigeria. These are traditional or hand-pounding method, the small-mill processing method and the large-mill processing method.
Paddy separator is mostly used to separate product on the basis of the differences in their sizes and multi screen separators are used for classifying grains to size grades. Some screen separators incorporate fan to remove light particles.
For any new product, we will communicate with customers and take their ideas into consideration to make the best product and we cordially welcomes all of you to visit china-zjlg to visit us for th win-win future. Click to get more informations.
Wheat is milled in paddy separator
Conventionally, wheat is milled in paddy separator which simultaneously remove outer bran layers and germ from the wheat kernel or berry and reduce the size of the starchy endosperm. A typical paddy separator will include a sequence of counter rotating opposed rollers which progressively break the wheat into smaller and smaller sizes. The output from each pair of rollers is sorted into multiple streams, typically by means of sifters and purifiers, to separate the bran and germ from the endosperm, and to direct coarser and finer fractions of the endosperm to appropriate rollers.
The prepared grain sample flows through an adjustable feed gate over the feed roll to the first pair of break rolls and from there, without intermediate sifting, to the second pair of break rolls. Subsequently, the material goes directly to the reduction section. Here, the second roll of the second break head operates against the fine corrugated roll of the reduction section. The closed grinding process with extremely small roll diameters and the resulting short grinding zone, together with the self-grinding effect of the grain particles among each other, ensure maximum separation of the endosperm. The short grinding process corresponding to the elasticity of the bran prevents splitting up of the bran. After having passed the last pair of rolls, the material drops into the round sifter.
Practical implications grain structure relate to every step from grain development and production through market ing to processing, utiliza-tion, and consumption. The structure and adherence of the hulls may contribute to protection of grain during germination or malting and protection against insect infestations. Germ retention during thresh-ing and separation during processing depend on the germ structure and location in the kernel. The subaleurone and central endosperm layers differ in cell size , shape, and structure and in composition, especially with regard to protein contents and quality. The main factors in grain hardness are the intrinsic hardness of the main components, the strength of interaction within the cell, and the interaction of individual cells to produce overall grain structure.
The husking performance of different paddy husker was compared for changes in the applied normal load. It was found that grains rotate between the rubber counterfaces on initial motion before being husked. In addition, harder rubbers were found to husk a higher proportion of entrained grains at lower applied normal load. By measuring the coefficient of friction between rice and rubber samples, the shear force required to husk a given percentage of grains could be calculated and was shown to be constant regardless of rubber type. Based on the mechanism seen in the high-speed video, it was evident that there was a limiting shear stress that was the governing factor over the husked ratio.
China-zjlg has industrial most advanced and complete inspection equipment, which can ensure the quality of the products. Welcome to leave a message:
The prepared grain sample flows through an adjustable feed gate over the feed roll to the first pair of break rolls and from there, without intermediate sifting, to the second pair of break rolls. Subsequently, the material goes directly to the reduction section. Here, the second roll of the second break head operates against the fine corrugated roll of the reduction section. The closed grinding process with extremely small roll diameters and the resulting short grinding zone, together with the self-grinding effect of the grain particles among each other, ensure maximum separation of the endosperm. The short grinding process corresponding to the elasticity of the bran prevents splitting up of the bran. After having passed the last pair of rolls, the material drops into the round sifter.
Practical implications grain structure relate to every step from grain development and production through market ing to processing, utiliza-tion, and consumption. The structure and adherence of the hulls may contribute to protection of grain during germination or malting and protection against insect infestations. Germ retention during thresh-ing and separation during processing depend on the germ structure and location in the kernel. The subaleurone and central endosperm layers differ in cell size , shape, and structure and in composition, especially with regard to protein contents and quality. The main factors in grain hardness are the intrinsic hardness of the main components, the strength of interaction within the cell, and the interaction of individual cells to produce overall grain structure.
The husking performance of different paddy husker was compared for changes in the applied normal load. It was found that grains rotate between the rubber counterfaces on initial motion before being husked. In addition, harder rubbers were found to husk a higher proportion of entrained grains at lower applied normal load. By measuring the coefficient of friction between rice and rubber samples, the shear force required to husk a given percentage of grains could be calculated and was shown to be constant regardless of rubber type. Based on the mechanism seen in the high-speed video, it was evident that there was a limiting shear stress that was the governing factor over the husked ratio.
China-zjlg has industrial most advanced and complete inspection equipment, which can ensure the quality of the products. Welcome to leave a message:
online today!
Women and men. That thing of all things.....
The one eyed splitting trowser viper. Sure, the creator designed 'em, probably with a lot more smarts than any of us, no? And estimates are that fully 6% of the male population ( puffters) absolutely adore the little fellers. But what about you ladies. I've heard that some of you actually don't like the things, or maybe it's the way they look, operate, or that they come attached to us men, mostly. From time to time they certainly have brought some folks misery, but joy as well, no? A similar percntge of dyky ladies, and perhaps many more of the straight type, like the hard inanimate ones, for a variety of reasons and to various purposes. And most of these don't look at all like the live item. What gives here?
Microchips Implant On Its Way Here
People Lineup to Get Microchips Implanted in their Hands! Mark of Beast is On Its Way Here!
by Power Point Paradise • November 24, 2014 •
By Lisa Haven
Major! People are lining up to get implanted! Wow! We all knew it was coming but did we realize how fast! A man by the name of Martijn Wismeijer has been able to store Bitcoins inside his body through a 12mm glass computer chip implanted in his flesh, but he’s not alone! Others are lining up receiving personalized alarm clocks and keyless doors that they can operate from a chip inside their bodies. Here is the breaking report by Ricky Scaparo…
Also if you haven’t seen this check out the Mark of the Beast Prototype that Motorola rolled out…
“He [The False Prophet] causes all, both small and great, rich and poor, free and slave, to receive a mark on their right hand or on their foreheads, and that no one may buy or sell except one who has the mark or the name of the beast, or the number of his name.” Revelation 13:16-17
VeriChip (now known as PostiveID) meets all the criteria that could give the Antichrist the ability to ‘mark’ every human being and prevent them from buying or selling anything. VeriChip is a RFID microchip that can be inserted into human flesh. Today it is used to microchip people who have medical conditions and will be used under Obamacare. It is the same technology used to tag animals to help reunited a pet with its owner. In October of 2004 it was cleared by the Food & Drug Administration. According to the VeriChip website RFID solutions are currently in use in over 5,000 installations worldwide including: healthcare, security, government, industrial markets, and more.
The Bible declares anyone receiving this ‘mark of the beast’ will get the Wrath of God..
“If anyone worships the beast and his image, and receives his mark on his forehead or on his hand, he himself shall also drink of the wine of the wrath of God, which is poured out full strength into the cup of His indignation. He shall be tormented with fire and brimstone in the presence of the holy angels and in the presence of the Lamb. And the smoke of their torment ascends forever and ever; and they have no rest day or night, who worship the beast and his image, and whoever receives the mark of his name.” Revelation 14:9-1
According to the Bible anyone who receives the mark will drink the wrath of God and the smoke of their torment will rise up forever and ever!
***
(If you're wondering if someone who has received the mark, then receives Jesus, will be raptured? Yes, God's mercy endures forever! But why wait?! ... for the Lord is sweet, his mercy endureth for ever, and his truth, faithfulness, and kindness to all generations. Psalm 100:1-5; 136:1; 2 Chronicles 7:3)
PowerPointParadise TFI (Video Posted)
Will We Ever Get There?
Every time I look at the stars, I wonder if we will ever get there. It seems unlikely. Is our lifespan too short or are we simply snookered by distance?
Alpha Centauri, our closest neighbor outside our own solar system, is almost four and a half light-years away. This means that if we could travel at one tenth of the speed of light - and we cannot even remotely - it would still take us 45 years to get there. That is 90 years for the return trip with no time for any sight seeing. Few of us will outlive the entire journey.
If we were to attempt to make the journey with one of the space shuttles, it would take 135,000 years just to get there. However, hitching a ride with one of the Voyagers seems to be a better bet. The one-way trip will only take 75,000 years. Alas, we just don’t live long enough to do it.
When we look at our current technology, it seems unlikely that we will get there first and then we don’t even know if Alpha Centauri has any habitable planets. The single planet discovered so far orbiting that star is far too hot to support life as we know it. Life, as we know it, may be much further away.
Therefore, it seems a much safer bet to wait until those little green men arrive here but I not sure if ‘safer’ is the right word. If these beings arrive here, they may not be that well disposed towards us. If they display the same imperialism as our earlier European powers, we’re going to be in for a rough ride. How would you fancy having to perform slave labor on a Drakonian farm? Aliens may even have a taste for long pig… also known as human meat.
Then, on the other hand, maybe those on the other side are sitting with the same problems. It may explain the lack of any real evidence regarding ‘visits’ to our planet for all we had so far are rumors and conspiracy theories. One such theory has it that the far side of the moon is infested with aliens and that the Americans had been warned off the moon; that is why they’re no going there any more!
And I don’t know why everybody just assumes that intelligent extra-terrestrial life has to be humanoid. Maybe when they get here, they will simply proceed with their journey after failing to find intelligent life!
Have a great day and don't go flying too far
Alpha Centauri, our closest neighbor outside our own solar system, is almost four and a half light-years away. This means that if we could travel at one tenth of the speed of light - and we cannot even remotely - it would still take us 45 years to get there. That is 90 years for the return trip with no time for any sight seeing. Few of us will outlive the entire journey.
If we were to attempt to make the journey with one of the space shuttles, it would take 135,000 years just to get there. However, hitching a ride with one of the Voyagers seems to be a better bet. The one-way trip will only take 75,000 years. Alas, we just don’t live long enough to do it.
When we look at our current technology, it seems unlikely that we will get there first and then we don’t even know if Alpha Centauri has any habitable planets. The single planet discovered so far orbiting that star is far too hot to support life as we know it. Life, as we know it, may be much further away.
Therefore, it seems a much safer bet to wait until those little green men arrive here but I not sure if ‘safer’ is the right word. If these beings arrive here, they may not be that well disposed towards us. If they display the same imperialism as our earlier European powers, we’re going to be in for a rough ride. How would you fancy having to perform slave labor on a Drakonian farm? Aliens may even have a taste for long pig… also known as human meat.
Then, on the other hand, maybe those on the other side are sitting with the same problems. It may explain the lack of any real evidence regarding ‘visits’ to our planet for all we had so far are rumors and conspiracy theories. One such theory has it that the far side of the moon is infested with aliens and that the Americans had been warned off the moon; that is why they’re no going there any more!
And I don’t know why everybody just assumes that intelligent extra-terrestrial life has to be humanoid. Maybe when they get here, they will simply proceed with their journey after failing to find intelligent life!
Have a great day and don't go flying too far
vanishing mail
How is it my sent mailbox is empty?
How does this occur?
Not all of them, just certain ones.
Yes, the person(s) they went to are still here.
Anyone else ever experience this?
I am talking about my Outbox only, not my Inbox.
How does this occur?
Not all of them, just certain ones.
Yes, the person(s) they went to are still here.
Anyone else ever experience this?
I am talking about my Outbox only, not my Inbox.
A Blog is a journal you may enter about your life, your thoughts, interesting experiences, or lessons you have learned. It's your own page on Connecting Singles that you can update on a regular basis, or just whenever you have something to say. You can write about an opinion, impart words of wisdom, or talk about something interesting in your day. Creating a blog is a good way to share something of yourself with Connecting Singles members. Reading blogs is a good way to learn more about members you have met here. Please be sure to read the blog rules before posting.
Would YOU like to post a blog on Connecting Singles? Have you written blogs that you'd like to share with other members? Posting your blogs shows your skill and creativity and helps members get to know you better. Your blog will appear on the Connecting Singles Blogs page and also in a link on your profile page. Click here to post a blog »