New Milling table
I have a Sieg mini-mill. It has one major fault. A tiny X, Y & Z azis. At long last someone did something about it. Sief finally manufactured and made available a mill table both 30% larger and with 40% more travel on the X and y axis. I ordered one when I learned of it.Yesterday a huge, but heavy (80+ pounds) cardboard was delivered. Inside was a wooden crate. Bolted to the inside of the wooden crate was a beefier milling table. I am a happy camper.
The new mill table next to the mill..
The two tables side by side....
My only wish now is that Sieg will come out with a new taller column so I can get more Z axis.
Comments (8)
Both Stihl and Husqvarna make them
This short video explains it visually.
Movements of the table can be broad (i.e., several inches), or as little as 1/1000 of an inch (about the thickness of 25% of the thickness of a sheet of paper). Operator's choice.