Create Blog

Last Viewed HowTo Blogs (281)

Here is a list of HowTo Blogs ordered by Last Viewed, posted by members. A Blog is a journal you may enter about your life, thoughts, interesting experiences, or lessons you've learned. Post an opinion, impart words of wisdom, or talk about something interesting in your day. Update your blog on a regular basis, or just whenever you have something to say. Creating a blog is a good way to share something of yourself with others. Reading blogs is a good way to learn more about others. Click here to post a blog.

harhar

jealous

jealous is normal if you love the person,but why this bf of mind chatting to other woman even i am infront of him.i feel grrrrrrrrrrrrrrrrrrrrrrrrrr everytime.frustrated confused
Post Comment
Aaltarboy

OK if I sleep on it?.....

We've all been asked this, and most have made the same request to others for major decisions. Of course, it also works as deception/avoidance. But what is it about sleep and sometimes figuring things out? I sometimes ask the I Ching, with rare misadvice, usually my fault in framing the Q or interpreting the A. But answers do come, sometimes in reverie. Look up all that Shakespeare said about sleep. He really had his shiite in one sock. Aa.
Post Comment

Machinist problem

So here is this little issue I am struggling with. Who knows, maybe someone here has the skills needed..

I have been trying to make some custom 6x32 tpi bolts for an old Belgian Bulldog revolver (about 1880ish). The original bolt bodies (frame mounted) are full of corrosion pits on the shaft and also someone without the right tools had managed to burr the screw heads at some point in the past.

The bolts are tiny and under magnification I suspect the threads were cut by hand. Just a tad under a #6 in size about 0.62 long. 3 of them. So I retapped the right side holes in the frame to #6x32. That was the easy part.

Only the bottom .197" has threads. Then the body has a smooth 1/8" shaft with a screw head size of 0.15".

I am using a steel 3/16" rod. I can usually get things down to about 0.155" before problems begin. When I use a steady rest (or a drill chuck in the tail stock) somewhere around .135" either the rod begins to bow or (worse) it just snaps in two. If I loosen the rest naturally the rod bends.

I know it can be done and hopefully without simply using just a file and sandpaper (which would probably take longer than I have years left).

I am using an HSS cutter which is giving a decent finish so I am confident I am okay there, but how to stabilize things so the rod doesn't snap or bow under cutter pressure remains the problem.

Yes, if I owned a monster press I could maybe swage it through a hole. But I don't have that.

I am of course also looking forward to the idea of putting threads on a part that tiny.

Open for solutions.., confused
Post Comment
Vierkaesehochonline today!

Bill Gates and wifey...

,,,and their Foundation. Experts in all aspects of science and politics. And how we should always do as they say, not as they do. Issue a warning that with C-19, all horsepitals would be over run with patients, and actions were suggested to ward this off. These included suggesting mobile treatment centers, into which patient spill over could occur. Also using multivariable modeling, (GIGO---garbage in-garbage out), guestimating mortality far beyond, more reasonable such guesses.
We used to marvel at the vapid female spouses of real Doctors, running the candy gift shops and such in House, Mouthing all sorts of clinical nonsense, with no more than an Mrs. red knee degree. "Well, my Daryll the Doctor always says----"
So, many governors are still using these bogus data to continue selective State wide shutdowns. Especially Churches/schools---Liquor stores and CFM abortion centers, not so much. Now for a whole year.
So arrogant ueber leftie slug, Gov. Cuomo, D-NY, takes it all a step further, and shunts active infective cases of the Virus, from Hospitals to, get this, open beds in Elderly Care Facilities! A more vulnerable population, a guy couldn't ask for. So numbers of elderly deaths there soar. Then, and get this, he agrees with staff to cover it all up, with fake, VERY fake, mortality numbers. As usually, it all comes out, but the corrupt MSM at first gives him a Biden-Obama pass. .And while he's blabber-mouthing about all his good work, and the bad work of the Donald, is now getting sanctioned by the FBI and his Party.
His dad may have been a class act, but the male offspring---yuck!
Post Comment
chatilliononline now!

Word block...

Most sites I've posted to have some type of filtering. Different names for the same thing, it could be called word filtering, censorship, word block, and sometimes it's called annoying!

Profanity blocking tops the list, but all websites are not equal. We can say WTF on CS but a musician site I'm a member of doesn't allow that. You type WTF and your post will read: Oh my goodness.

Are you serious... they inserted Oh my goodness in place of WTF.

The military coined SNAFU and it's often used in TV news, newspapers and online news. Explain to your 10 year old what SNAFU means.

Lots of words get blocked here. The other word for rooster that begins with 'C' gets blocked by the filter. There's a famous British singer Joe who's family name gets blocked simply because it contains part of the blocked word. Depending on the website, that city in Thailand also gets blocked. You know, Bang....

If your name is Richard, don't expect your nickname (starting with the letter D) to pass the filter.

Buttocks... only the British version 'arse' gets through, the 3 letter word used in America is blocked. But you can say shit.

Oh, you graduated with honors? don't expect to be able to use the Latin word that goes with 'laude'

The 'C' word that describes some women won't make it through, nor will some body parts.

Consistently inconstant, but you've just got to work with it!
Post Comment
MimiNGUYEN79

How to name?

Lady who trades xxx for materials/money, calls prostitute.

Man who trades xxx for materials/money, calls male-prostitute.

Lady who not able to have xxx or even kiss any man except her husband, calls.......?

Man who not having xxx with anyone except his wife, calls.........?



Below photos are not relative to the subject, just some selfie for fun of today....

Embedded image from another site


Embedded image from another site


Embedded image from another site


Dinner time...
Post Comment
Ed1941

Dreams, again!

I have tried to comment on every dream blog that I can because I find dreams so fascinating. I could never post all the crazy dreams that I have had because it would be impossible.

My most common dream happens to be a recurring dream where I am driving somewhere in fast moving traffic and all of a sudden I am going in reverse. I can see the people in the other cars speeding along with me but they don't seem to care that I am going in reverse.

So, I just happily cruise!

All of a sudden it changes and I am moving on a wooden sled with no wheels or engine but still cruising. OR I am riding a bike and it's going quite well until all of sudden I can't pump it anymore and I look at the tires and they're flat and the rims are bent!

When I wake up I just have to laugh because the dreams are so vivid but still silly foolish!!

Please feel free to tell me about your crazy dreams.
Post Comment
Vierkaesehochonline today!

Speeches at the low, VERY low, ratings DNC disvention...

... sure, most show the expected pandering, hate talk, and of course, the usual racially driven, unfulfilled promises to the 'taken for granted', VERY taken for given, minority vote.
Keep them dependent, with unlivable inner city life/infrastructure, crappy public schools (and teaching/administrative staff), violence---mostly against each other, and often racially configured (Negros against lLatinos, Asian shop owners and others, such as JJ's "Hymies), Generations of Democrat policies and rule.
And the distortions are far too numerous for even someone of my high caliber, VERY high, to address individually and completely. So I'll focus on one such frequently repeated ueber spin of facts.
And by whom else but our last affirmative action, part Black POTUS, B Hussein O? But first, a little valid digression. And again, don't just take my words for any of it.
Cared for by loving White Granny, who then gets thrown under the bus with, "she's a typical white person". And giving a good ignoring to his Family in Africa, some of whom have lived rough, VERY rough.
Education, from early private school, paid for by others, often Whitey charities and, of course, by us taxpayers. But don't ever expect to see well hidden and protected test scores, or course grades.
On to similarly funded "work", as community organizer. Never, NEVER, a real non public teat funded job. And undistinguished short them in the Illinois State Senate, and who's only record was for the most votes registered as "PRESENT". Real profiles in courage. And little more in the US Senate, short stay.
And a similar tale for affirmative action Wifey, who was granted a diversity overseer's administrative job at a Chicago medical center, forsome $300 plus large. Left it, and the position wasn't renewed anywhere near her sinecure.
And don't forget how the lockstep biased press fawned over his being a "constitutional law professor". As if. They've since stopped the charade, but ask any one to compare this clown's academic record with one of someone who really was such, and actually made it on more than race.
So it is with this background that I address these folks, now again living on OPM, in their $12 very large, VERY very, Massatwoshits island liberal mansion.
In Saul Alinsky style, he has the nerve to say, often, that the really successful in the world, especially in the USA and West, "didn't make it on their own." Oh no, it was infrastructure, as in roads, buildings, rules of contract law, etc. that somehow did it.
Well, EXCUUUUUSE ME! Sure, these items help all to advance, at least those willing to work hard. But whence the FUNDING for all the infrastructure? That's right, the TAXPAYERS' many nickels, VERY many. Or by capitalist investment. Again, the spin has the mule behind the cart.
Both of which paid for this crumb and his wife's ways to the top. VERY top. Along with much self loathing White liberal Democrat guilt.
Arguments contra hereto? Or merely blocking and lifted copy and paste From fake news sources.
We'll see.
Post Comment
peednama

Who Says That Its New Year ! ! !

How you say that its new year ?
Only calader is changed & all people say its new year.
if you really need new year.
change your attitute & thoughts.



Hurted people , don't comment on my blog.
stay with your useless new year.
Post Comment
calmheartseeks

Reviving the Blogs

I have been thinking lately have things seem to be quieting down on CS; how not as many members blog or post, and how many have left. daydream

With the advent of Proficiency's blog, one of a personal and yes, controversial spiritual nature, it occured to me that perhaps others among us would like to write our thoughts in such a blog but feel this is not the appropriate forum for it, that our blog would be criticized, not understood, suffer from non-participation or worse ignored...in summation, it takes bravery to post a blog because of unspoken assumptions about what is acceptable or interesting, and what is not.

What if we gave everyone a blanket free pass to write a blog freely on things important to them or that they'd like to discuss, nothing profane or hurtful, but just allowing true creative juices to flow.

Seriously, how many really good conversations do we have going on here? What would be some good topics?

Comment freely, for in keeping with the current, I will probably delete this blog soon.....

laugh laugh laugh head banger cheers hug bouquet
Post Comment
We use cookies to ensure that you have the best experience possible on our website. Read Our Privacy Policy Here